作者简介：任文坛(1958-),男,高级工程师.
作者单位：任文坛（上海交通大学高分子材料研究所,上海,200240）
张勇（上海交通大学高分子材料研究所,上海,200240）
张隐西（上海交通大学高分子材料研究所,上海,200240）
参考文献：
[1]严学华,孙少纯,蒋宗宇.原位反应复合材料研究进展[J].铸造设备研究,2001,(1):27-31.
[2]朱晓光,王为民.原位反应合成金属基复合材料[J].国外建材科技,2005,26(4):1-4.
[3]杨霓虹.原位生成增强体金属基复合材料及其应用前景[J].材料导报,1993,(1):53-54.
[4]Zhang Y,Chen XZ,Zhang YX,et al.Epoxidation lf unsaturated rubbers with alkyl hydroperoxide using molybdenum compounds as catalyst in the reactive processing equipment[J].Macromol Mater Eeg,2001,286 (8):443-448.
[5]Zhang Y,Zhang Y,Chen XZ,Zhang YX.Epoxidation of ethylene propylene diene rubber by t-butyl hydroperoxide in the presence of molybdenum oxide[J].React Funct Polym,2001,47 (2):93-99.
[6]张莹,陈信忠,张隐西.顺丁橡胶环氧化的新方法[J].合成橡胶工业,1999,22(6):372.
[7]Varaporn Tanrattanakul,Boonsit Wattanathai,Adul Tiangjunya,Putsadee Muhamud.In situ,epoxidized natural rubber:Improved oil resistance of natural rubber[J].Journal of Applied Polymer Science,2003,90(1):261-269.
[8]孙冬梅,李克斌,梁星宇.饱和氯化聚醚化丁腈橡胶的开发和应用[J].化工新型材料,1999,20(10):20-23.
[9]孙冬梅,石劲松,王克山.氯化聚醚化丁腈橡胶共混技术的方法研究[J].黑龙江矿业学院学报,1999,9(4):10-16.
[10]杨秀利,张书香,樊庆春,等.氯化聚乙烯共混丙烯酸钠制备吸水膨胀橡塑材料[J].应用化学,2002,19(8):765-768.
[11]袁新恒.不饱和羧酸盐增强丁腈橡胶的研究[D].上海交通大学博士论文,2000.
[12]彭宗林.不饱和羧酸盐增强三元乙丙橡胶的研究[D].上海交通大学博士论文,2001.
[13]尹德荟.不饱和羧酸金属盐增强丁苯橡胶的研究[D].上海交通大学博士论文,2002.
[14]杜爱华.不饱和羧酸金属盐增强乙烯-羧酸乙烯酯橡胶的研究[D].上海交通大学博士论文,2003.
[15]任文坛.原位合成丙烯酸盐制备吸水膨胀橡胶及其性能的研究[D].上海交通大学博士论文,2004.
[16]X H Yuan,Z L Peng,Y Zhang,Y X Zhang.The properties and structure of peroxide-cured NBR containing magnesium methacrylate[J].Polymers & polymer composites,1999,7(6):431-436.
[17]X H Yuan,Z L Peng,Y Zhang,Y X Zhang.In-situpreparation of zinc salts of unsaturated carboxylic acids to reinforce NBR[J].Journal of Applied Polymer Science,2000,77:2704.
[18]Z L Peng,Y Zhang,X Liang,Y X Zhang.Metallic methacrylate as a reactive filler to reinforce Ethlene-propylenediene rubber[J].polymers & polymer composites,2001,9(4):275-282.
[19]D H Yin,Y Zhang,Y X Zhang,Z L Peng.Effect of methacrylate on the mechanical properties of peroxide-cured SBR vulcanizates filled withAl(OH)3[J].Polymers & polymer composites,2001,9(8):523-530.
[20]D H Yin,Y Zhang,Y X Zhang,Z L Peng.A comparison between the SBR vulcanizates reinforced by magnesium methacrylate added directly or prepared in situ[J].European Polymer Journal,2003,39:99-105.
[21]A H Du,Z L Peng,Y Zhang,Y X Zhang.Effect of magnesium methacrylate on the mechanical properties of EVM vulcanizates[J].Polymer Testing,2002,21:889.
[22]Du AH,Peng ZL,Zhang Y,Zhang YX.Water swelling rubber prepared by in situ formed sodium acrylate in EVM[J].Kautschuk Gummi Kunststoffe,2003,56 (6):316-321.
[23]Ren WT,Peng ZL,Zhang Y,Zhang YX.Water swelling elastomer prepared by in situ formed lithium acrylate in chlorinated polyethylene[J].Journal of Applied Polymer Science,2004,92 (3):1804-1812.
[24]Ren WT,Zhang Y,Peng ZL,Zhang YX.Investigation on the water-swelling properties of chlorinated polyethylene modified by in siru formed sodium acrylate[J].Polymer Testing,2004,23 (7):809-816.
[25]Ren WT,Zhang Y,Peng ZL,Zhang YX.Preparation and properties of a Water-swelling rubber by in situformed lithium acrylate in nitrile rubber[J].Polymers & Polymer Composites,2005,13 (2):181-190.
[26]Ren WT,Zhang Y,Peng ZL,Zhang YX.A new approach to preparation of water-swelling rubber[J].Gummi Fasern Kunststoffe,2005,58 (6):374-380.
[27]陈朝晖,王迪珍.甲基丙烯酸锌在NBR中的应用[J].合成橡胶工业,2001,24(5):294-297.
[28]赵阳,冯予星,刘力,张立群,等.ZDMA/NBR纳米复合材料的性能研究[J].橡胶工业,2002,49(1):9-13.
[29]王则民,俞巧红.稀土功能材料的研究进展[J].自然杂志,1999,22(2):91-94.
[30]魏延志,陈彦模,张瑜,等.稀土在高聚物改性中的应用[J].高分子材料科学与工程,2005,21(1):52-55.
[31]刘力,等.原位反应法制备丙烯酸钐/丁腈橡胶复合材料及其荧光性能研究[J].高等学校化学学报,2004,25(3):570-574.
[32]刘力,贺磊,张婉,等.原位聚合制备氧化钆/丁腈橡胶复合材料的磁性能[J].合成橡胶工业,2004,27(6):386.
[33]刘力,隋轶巍,贺磊,张立群.Gd2O3/NBR复合材料防射线屏蔽性能及力学性能的研究[J].合成橡胶工业,2004,27(1):49.
[34]Li Liu,Lei He,Cheng Yang,et al.In situ reaction and radiation protection properties of Gd(AA)3/NR composites[J].Macromolecular Rapid Communications,2004,25(12):1197-1202.
[35]颜和祥.白炭黑/天然橡胶之间相互作用及其对力学性能影响的研究[D].上海交通大学博士论文,2005.
[36]姜其斌,贾德民,杨军.GMA原位改性炭黑对EPDM胶料性能的影响[J].橡胶工业,2004,51(4):205-209.
[37]姜其斌,贾德民,杨军.不饱和羟基脂肪酸原位改性炭黑补强三元乙丙橡胶的性能[J].弹性体,2004,14(2):25-29.
[38]姜其斌,贾德民,杨军.不饱和羟基脂肪酸原位改性炭黑补强EPDM的结构和形态[J].弹性体,2004,14(3):18-22.
[39]Yabin Zhou,Shifeng Wang,Yinxi Zhang,Yong Zhang.Reinforcement effect of MAA on nano-CaCO3 filled EPDM vulcanizates and possible mechanism[J].Journal of polymer science:Part B:polymer physics,2006,44:1226-1236.
[40]Michael Alexandre,Philippe Dubois.Polymer-layered silicate nanocomposites:preparation,properties and use of a new class of materials[J].Materials Science and Engineering,2000,28:1-63.
[41]Peter C Lebaron,Zhen Wang,Thomas J Pinnavaia.Polymer-layered silicate nanocomposites:an overview[J].Applied Clay Science,1999,15:11-29.
[42]Suprakas Sinha Ray,Masami Okamoto.Polymer/layered silicate nanocomposites:a review from preparation to processing[J].Progress in Polymer Science,2003,28:1539-1641.
[43]Shaohui Wang,Yong Zhang,Zonglin Peng,Yinxi Zhang.New method for preparing polybutadiene rubber/clay composites[J].Journal of Applied Polymer Science,2005,98(1):227-237.
[44]王韶晖,任文坛,张勇,等.原位有机改性法制备EPDM/蒙脱土纳米复合材料的热分解行为及填料-橡胶相互作用[J].弹性体,2005,15(6):15-18.
[45]王韶辉.橡胶/蒙脱土纳米复合材料的结构与性能研究[D].上海交通大学博士论文,2005.
[46]刘岚,罗远芳,贾德民,傅伟文.天然橡胶/蒙脱土纳米复合材料的制备与性能[J].材料研究学报,2005,20(1):99-103.
[47]刘岚,罗远芳,贾德民,等.混炼法制备的纳米复合材料的结构与性能研究[J].合成橡胶工业,2002,25(4):257.
[48]焦宁宁,王建明.聚合物纳米复合材料研究进展(Ⅱ)[J].石化技术与应用,2001,19(2):121-126.
[49]任杰,刘艳,唐小真.聚合物有机-无机纳米复合材料研究及应用[J].材料导报,2003,17(2):58-63.
[50]段先健,张立群,伍社毛,王一中.用溶胶-凝胶法原位生成SiO2增强橡胶[J].合成橡胶工业,2000,23(3):148-152.
[51]段先健,伍社毛,钟荣栋,张立群.溶胶凝胶法原位生成增强EPDM[J].合成橡胶工业,2001,24(4):234.
[52]王进文编译.白炭黑和硅烷偶联剂就地补强的丁腈橡胶[J].特种橡胶制品,2002,21(1):28-34.
