基金项目：湖北省科技攻关项目(2002AA107B302)
作者简介：周爱军(1964-),男,湖北武汉人,副教授,主要研究方向为功能高分子.
作者单位：周爱军（武汉工程大学材料科学与工程学院,湖北,武汉,430073）
杨鹏（武汉工程大学材料科学与工程学院,湖北,武汉,430073）
刘长生（武汉工程大学材料科学与工程学院,湖北,武汉,430073）
丁军平（武汉工程大学材料科学与工程学院,湖北,武汉,430073）
朱仕惠（武汉工程大学材料科学与工程学院,湖北,武汉,430073）
参考文献：
[1]Zhang Guo,Zhang Zhihao,Xie Fengchao,et al.Chlorohydrin water swellable rubber compatibilized by an arnphiphilie graft copolymer.I.synthesis and characterization of compatibilizer PVA-g-PBA[J].Journal of Applied Polymer Seience,2000,(75):977～986.
[2]H Eklind,S Sehantz,F H J Maurer,et al.Characterization of the interphaSe in PPO/PMMA blends compatibilized by P(S-g-EO)[J].Maeromoleeules,1996,(29):984～992.
[3]Sabu Thomas,G Groeninckx.Reactive eompatibilisation of heterogeneous ethylene propylene rubber(EPM)/nylon 6blends by the addition of comtxatibiliser precursor EPM-g-MA[J].Polymer,1999,(40):5 799～5 819.
[4]丁军平,刘长生,周爱军.吸水树脂表面微波接枝改性及共混研究[J].弹性体,2005,(15):19～22.
[5]周爱军,刘长生.遇水膨胀橡胶吸水膨胀和力学性能研究[J].弹性体,2002,(12):28～31.
[6]Changsheng Liu,Junping Ding,Lang Zhou,et al.Mechanical properties,water-swelling behavior,and morphology of water-swellabh rubber prepared using crosslinked sodium polyacrylate[J].Journal of Applied Polymer Science,2006,(102):1 489～1 496.
[7]谢瑞广,薛宁娟,丘哲明.聚合物体系脆韧转变的逾渗分析[J].宇航材料工艺,2003,33(4):6～9.
[8]Souheog Wu.Phase structure and adhesion in polymer blends:a criterion for rubber toughening[J].Polymer,1985,(26):1 855～1 863.
[9]Margolina A,Wu Souheng.Percolation model for brittle tough transition in polymer blends[J].Polymer,1988,(29):2 170～2 173.
[10]Souheng Wu.A generalized criterion for rubber toughening:The critical matrix ligament thickness[J].Journal of Applied Polymer Science,1988,(35):549～561.
[11]Souheng Wu.Plasticity of particle-reinforced composites with a ductile interphase[J].Polymer International,1992,(29):229～247.
[12]William Y HSU,Souheng Wu.Percolation behavior in morphology and modulus of polymer blends[J].Polymer Engineering and Science,1993,(33):293～301.
[13]Wei Jiang,Hao jun Liang,Bingzheng Jiang.Interpartiee distance-temperature-strain rate equivalence for the brittletough transition in polymer blends[J].Polymer,1998,(39):4 437～4 442.
[14]Wei Jiang,Chang-hai Liu,Zhi-gang Wang.Brittle-tough transition in PP/EPDM blends:effects of interpartice distance and temperature[J].Polymer,1998,(39):3 285～3 288.
[15]W Jiar,g,S C Tjong,R K Y Li.Brittle-tough transition in PP/EPDM blends:effects of interpartiele distance and tensih deformation speed[J].Polymer,2000,41:3 479～3482.
[16]ZHlJu,RKYLi,SCTjoe4g,et al.Influenceof particle disperdon on the matrix Iigament thickness of polymer blerds 1.The oJnfiguration of well-disversd particles versus simple cubic lattice[J].Polymer,1998,(39):4 433～4 436.
[17]Fu Q,Wang G H.Polyethylene toughened by CaCO3 partieles-pereolation model of britle-ductile transition in HDPE/CaCCh blends[J].Polymer International,1993,(30):309～312.
|
